Enter the code shown below

Our Model

JUMBO 90 Model Briquetting Press

"JUMBO 90" Model Briquetting Press

capacity 1500 Kg / Hr ( Grinder Less Technology ) without any binding agent
Pride Service of Successfully 18 Years in briquetting Press manufacturing field
 

Benefits of "jumbo 90" 1500 Kg / hr Model

  • Raw materials upto 25mm size can be used without Grinding
  • Raw Materials like Bagasse, ground nut shells, castor seed shells, saw dust, wheat grass, rice husk (paddy husk), Mustered Shells, Jira Straw are not required to be grinded
  • Since these raw materials do not required grinding, there is no need of "SIZEING UP" (Grinding) which helps to save power & labour expenses
  • The product cost of "JUMBO 90" (1500 Kg/hr), production is Rs. 400=00 per mt. While production cost is Rs. 550=00 per MT in the in super - 60 (550 kg/hr)
  • Two super - 60 machines will require 120 H.P. of power and will produce 1100 Kg/Hr while "Jumbo 90 " can produces 1500 Kg/Hr with the power requirements of 88H.P. only
  • Operating two super 60 models will require 2 skilled and 7 to 8 unskilled labors which is same as " JUMBO 90" model
  • Hence production cost is reduced by 35-40 % and operation efficiency is increased against operating two super 60 models
 

Briquetting Press

  • MODEL: "JUMBO 90"
  • TYPE: CRANK TYPE
  • STROKE: 200MM
  • R.P.M.: 230
  • TOTAL POWER REQUIREMENTS:88HP.
  • PRODUCTION CAPACITY
    [+-20% DEPENDING ON DENSITY
    AND QUALITY OF RAW MATERIAL]:
    1500 Kg/Hr.
  • FINISHED PRODUCT SIZE:90 MM DIA
  • FINISHED PRODUCT SHAPE:CYLINDRICAL
  • FINISHED PRODUCT LENGTH:6" TO 12"
  • RAW MATERIAL FORMUP TO 25 MM SIZE CAN BE USED DIRECTLY
  • PROCESS COST:Rs. 400/- PER MT. DEPENDING UPON QUALITY AND DENSITY OF RAW MATERIAL

We supply (HOT) flash AIR DRYER on turn key basis with all necessary materials

FLASH AIR (HOT) DRYER
When Moisture % are more then 12% in raw materials. Hot air dryer is required to reduce moisture contain % from raw material

  • Model"TORNADO"
  • Type Flash Air Dryer
  • Capacity
    (+ 20% Depending on Quality of Raw Material)
    1.5 Ton Hour
  • Drying Capacity (in one cycle l) 20%
  • Power Requirement
    1.) Blower 12.5 HP (RPM 2800)
    2.) Conveyor 2.0 HP Motor (RPM 1440)
    3.) Air Lock Motor 0.5 HP